Gradience Pro /Enterprise - Port 3050 Setup
Set the Inbound Rule:
1. Open the Control Panel and then open your Windows Firewall and click Advanced Settings.
2. Click Inbound Rule in the upper left and then click New Rule in the upper right.
3. When the screen changes, select Port and click Next.
4. When the screen changes again, leave it set to TCP and Specific local ports.
5. In the field, enter 3050.
6. Select Allow the connection and click Next.
7. Leave all three check boxes checked and click Next.
8. Enter Firebird into the Name field and enter Gradience Database Engine in the Description field.
9. Click Finish.
Set the Outbound Rule:
1. Click Outbound Rule in the upper left and then click New Rule in the upper right.
2. When the screen changes, select Port and click Next.
3. When the screen changes again, leave it set to TCP and Specific local ports.
4. In the field, enter 3050.
5. Select Allow the connection and click Next.
6. Leave all three check boxes checked and click Next.
7. Enter Firebird into the Name field and enter Gradience Database Engine in the Description field.
8. Click Finish.
Comments
Article is closed for comments.